Publicaciones

Las publicaciones más relevantes realizadas por los investigadores de la Fundación incluyen:

Nanostructured materials and Nanocomposites

M. Darder, P. Aranda, A. I. Ruiz, F. M. Fernandes and E. Ruiz-Hitzky. Design and preparation of bio-nanocomposites based on layered solids with functional and structural properties. Materials Science and Technology, 24 (2008) in press.
R. Fernández-Saavedra, M. Darder, A. Gómez-Avilés, P. Aranda and E. Ruiz-Hitzky. Polymer-clay nanocomposites as precursors of nanostructured carbon materials for electrochemical devices: templating effect of clays. Journal of Nanoscience and Nanotechnology, 8 (2008) in press.
P. B. Oliete, J. I. Peña, A. Larrea, V. M. Orera, J. LLorca, J. Y. Pastor, A. Martín and J. Segurado. Ultra-High Strength Nanofibrillar Al2O3-YAG-YSZ Eutectics. Advanced Materials, 19, 2313-2318, 2007.
M. Darder, P. Aranda and E. Ruiz-Hitzky. Bionanocomposites: a new concept of ecological, bioinspired and functional hybrid materials. Advanced Materials 19, 1309-1319, 2007.
A. Gómez-Avilés, M. Darder, P. Aranda and E. Ruiz-Hitzky. Functionalized carbon-silicates from caramel-sepiolite nanocomposites. Angewandte Chemie International Edition, 46, 923–925, 2007.
L. Burgos-Asperilla, M. Darder, P. Aranda, L. Vázquez, M. Vázquez and E. Ruiz-Hitzky. Novel magnetic organic-inorganic nanostructured materials. Journal of Materials Chemistry, 17, 4233–4238, 2007.
J. F. Bartolomé, A. H. de Aza, A. Martin, J. Y. Pastor, J. LLorca, R. Torrecillas and G. Bruno. Alumina/Zirconia Micro/nanocomposites, a New Material for Biomedical Applications with Superior Sliding Wear Resistance. Journal of the American Ceramic Society, 90, 3177-3184, 2007.
J. M. Molina-Aldareguia, S. J. Lloyd. Multilayered Materials: A Palette for the Materials Artist. Advances in Nanoengineering: Electronics, Materials and Assembly, Royal Society Series on Advances in Science - Vol. 3,(A. G. Davies and J. M. T. Thompson, Eds.), World Scientific Publishing, 2007.
J.M. Molina-Aldareguia, I. Ocaña, D. González, M. R. Elizalde, J. M. Sánchez, J. M. Martínez-Esnaola, J. Gil Sevillano, T. Scherban, D. Pantuso, B. Sun, G. Xu, B. Miner, J. He, J. Maiz. Adhesion studies in integrated circuit interconnect structures. Engineering Failure Analysis, 14, 349-354, 2007.
I. Ocaña, J.M. Molina-Aldareguia, D. Gonzalez, M. R. Elizalde, J. M. Sánchez, J.M. Martínez-Esnaola, J. Gil Sevillano, T. Scherban, D. Pantuso, B. Sun, G. Xu, B. Miner, J. He, J. Maiz. Fracture characterisation in patterned thin-films by cross sectional nanoindentation. Acta Materialia, 54, 3453–3462, 2006.

Structural Composites

E. Totry, C. González y J. LLorca. Failure locus of fiber-reinforced composites under transverse compression and out-of-plane shear. Composites Science and Technology, 68, 829-839, 2008.
E. Totry, C. González y J. LLorca. Influence of the Loading Path on the Strength of Fiber-Reinforced Composites Subjected to Transverse Compression and Shear. International Journal of Solids and Structures, 45, 1663-1675, 2008.
C. González and J. LLorca. Virtual Fracture Testing of Fiber-reinforced Composites: A Computational Micromechanics Approach. Engineering Fracture Mechanics, 74, 1126-1138, 2007.
C. González and J. LLorca. Numerical Simulation of the Fracture Behavior of Ti/SiC Composites Between 20ºC and 400ºC. Metallurgical and Materials Transactions, 38A, 169-179, 2007.
E. Arévalo, C. González, F. Gálvez and J. LLorca. Modelling Low Velocity Impact in C/epoxy Laminates. 23rd International Symposium on Ballistics, (F. Gálvez and V. Sánchez-Gálvez, Eds.), vol. 2, pp. 1123-1132, 2007.

Computational Modelling of Materials

A. Zhu, G. J. Shiflet and S. Poon. Atomic Bond Deficiency as a Structural Defect in Metallic Glasses: Relevance to Glass Transitions. Acta Materialia 56, 593-601, 2008.
A. Zhu, S Poon and G. J. Shiflet. Structural Relaxation of Metallic Glasses: Chemical Short-Range-Ordering Analysis. Metallurgical and Materials Transactions, 39A (2008) in press.
A. Zhu and G. J. Shiflet. Thermodynamic Overview of Metallic Glass Formability: Application to Al-Based Systems, Advanced Structural Materials: Properties, Design, Optimization & Applications, Chapter 6, Materials Engineering Series, Taylor & Francis, 2007.
A. Zhu, G. J. Shiflet and E. A. Starke. Computational and Experimental Techniques in Intelligent Design of Age-Hardenable Aluminum Alloys. Applied Computational Materials Modeling: Theory, Simulation and Experiment, Chapter 9, Springer Academic, 2007.
B. M. Gable, A. Zhu, G. J. Shiflet and E. A. Starke. Assessment and Optimization of the Thermodynamic Description for the Aluminum-Rich Corner of the Al-Cu-Mg-(Ag) Phase Diagram. CALPHAD (2007) in press.

Micromechanics and Nanomechanics

O. Pierard, J. LLorca, J. Segurado and I. Doghri. Micromechanics of Particle-reinforced Elasto-viscoplastic Composites: Finite Element Simulations Versus affine Homogenization. International Journal of Plasticity, 23, 1041-1060, 2007.
J. LLorca, C. González and J. Segurado. Finite Element and Homogenization Modelling of Materials. Multiscale Materials Modelling. Fundamentals and Applications, Woodhead Publishing, Cambridge, pp. 121-147, 2007.
C. González and J. LLorca. Mechanical Behavior of Unidirectional Fiber-Reinforced Polymers under Transverse Compression: Microscopic Mechanisms and Modeling. Composites Science and Technology, 67, 2795-2806, 2007.
O. Pierard, C. González, J. Segurado, J. Llorca and I. Doghri. Micromechanics of Elasto-plastic Materials Reinforced with Ellipsoidal Inclusions. Internacional Journal of Solids and Structures, 44,6945-6962, 2007.
J. Segurado, J. LLorca and I. Romero. Computational Issues in the Simulation of Two-dimensional Discrete Dislocation Dynamics. Modelling and Simulation in Materials Science and Engineering, 15, S361-S375, 2007.
J. Moraleda, J. Segurado, and J. LLorca. Finite Deformation of Porous Elastomers: A Computational Micromechanics Approach. Philosophical Magazine, 87, 5607-5627, 2007.